![]() |
| Neill Duncan. Photo by Joe Glaysher |
Harmen Hielkema: Luthier, Bass player, Drummer and Vocalist. Instruments and cases made and repaired. Contact me Email: kaurispring@xtra.co.nz
Wednesday, February 5, 2014
"The Man and his Machine: Neill Duncan, Saxophonist" on National Australian Radio ABC
Labels:
ABC,
Amputation.,
Gina McKeon,
Neill Duncan,
one handed saxophone,
Sarcoma
Saturday, January 4, 2014
Sydney Morning Herald article about Neill Duncan. Article by Lucy Carroll
One armed saxophone player
Neill Duncan is a saxophonist who lost his arm last year due to cancer. He is getting two one armed saxophones made for him and will continue to play. Please Log in to update your video settings
A snowy blanket covered Katoomba on the afternoon I found out I had sarcoma, a rare type of cancer, in my left arm. The roads were scattered with abandoned cars. It was apocalyptic, a scene analogous to the past year of my life.
I'm a musician. I support my family with one tool: my saxophone. So discovering I had cancer in my arm - and then having it chopped off - was a very dark time.
Advertisement
In a funny way it has been a blessing. My wife, Rachel, and
our four kids, Ruben, Polly, Pearl and Floyd, have received amazing
support from the Blue Mountains community - from having meals dropped on
our doorstep to neighbours leaving cash in our mailbox.Being a jazz saxophone player, losing my arm was very dramatic and affected people deeply, especially Michael Lira, who I play with in the band Darth Vegas. So he tracked down a guy in Amsterdam who adapts wind instruments for people with disabilities.
It has taken a year for instrument maker Maarten Visser to custom build the world's only one-hand tenor sax. He hydraulically moved all the top keys to the bottom so I just use my right hand.
Against all odds, it seems I will play again. I have the same excitement about relearning the instrument as I did when I first picked up a sax 35 years ago.
With a $26,000 price tag it was way out of our budget. Then I started getting phone calls. One was from Support Act, a benevolent society for musicians who come into hard times. They put money towards our mortgage and the new saxophone.
Musicians don't have a safety net. We don't have sick pay or annual leave. I feel incredibly blessed and supported by initiatives, the community and family. It's been a hard road, learning to live with one arm … but having something that might kill me has made me so grateful to be here.
Lucy Carroll
Read more: http://www.smh.com.au/entertainment/music/lifechanging-event-losing-an-arm-20131231-3046p.html#ixzz2pUOzbVsn
Neill Duncan makes a spectacular comeback!
My Life long friend and musical collaborator has made a spectacular comeback from a life threatening illness.
I could not be more proud of you Neillo.
I could not be more proud of you Neillo.
Labels:
Harmen Hielkema.,
Neill Duncan,
one handed saxophone
Monday, August 5, 2013
Banjo Ukelele, "Sing a Song of Sixpence"
| Our new (old) Banjo Ukelele |
I've spent some time restoring a small, English made, banjo ukelele. It has no identifying manufacturers markings but I'm reassured that it is English by those who know. The instrument came into my possession when an elderly colleague of my father was moved into full time care by his family. Whilst clearing out his home they very kindly thought to gift me several items of musical and sailing interest.
The vellum had a small tear, the four pairs of strings were rusty and nasty and the neck was pulling away from the pan at an alarming angle under the tension of those wires. The instrument showed signs of having been played a good deal in it's early life as evidenced by the frets and ebony fingerboard which were well worn and the finish was abraded in many places down to the wood. The banjo mandolin had also sustained some damage during its lifetime with some of the ebony on the head stock having come away and very poorly reattached. other damage included the tail piece which had been bent down, touching the vellum.
I stripped the instrument down to its last component parts and began assessing and cleaning the bits and pieces. I washed all the metal components and polished them before putting them all into a container saving all the original screws which were all re useable except the neck screws.
I unscrewed the neck from the pan and set them aside and prepared my workbench for the repair, re shaping and reattaching of the neck to the pan. I scraped the ebony finger board with a Stanley blade between the frets until all the recessed marks were gone. I then filed the frets.
Next I modified the machine heads by removing every second winder, reducing the number from 8 to 4. I refinished the ebony repair to the head stock. The ebony is very low grade and may even be faux. I begin to wonder if this company was scorching maple wood to near charcoal to create an ebony facsimile!
I refinished the distorted, mating wood surfaces and reattached the neck with suitable new fasteners.
I inspected the vellum and realised that it has sustained damage to the perimeter during manufacture due to a very poor casting finish on the cast iron tone ring and on the chromed brass tension ring, each having very sharp edges. I removed the flesh hoop from the vellum by soaking it in water for a few minutes. The flesh hoop was a piece of galvanised wire, quite suitable to be reused.
I then set to with a fine file and emery paper to remove the sharp edges and the corners that bore down on the vellum. After achieving this I gave the raw cast iron tone ring a coat of iron oxide, red etch primer which was a suitable finish colour for the ring which can be seen through the pierced chrome tension hoop.
I had ordered a new vellum from a respected instrument maker in Auckland, Graham "Bones" Hurlock of Barebones folk instruments.
I needed a 14" vellum to cover the 8" hoop. I soaked the new vellum in cold water for 10 minutes then wrung it out before taking it over to the work bench. The process of mounting a new vellum can be found in several good instructional videos on You Tube.
Once the new vellum was mounted and dried I was able to reassemble the components.
The next step was to set up the instrument to take four new Aquila, tenor, Nylgut strings. The old nut had to come out and I needed to make a new saddle, I had a small piece of "tusk" resin nut stock left over from my bass guitar project which I shaped to fit.
I then selected a beautiful piece of kauri timber from which to form a saddle. The old saddle was genuine ebony but it was too low profile and the string spacing too narrow for the new set up, besides which it was grooved for 8 strings.
| New vellum, Aquila strings and saddle, the red painted, iron tone ring can bee seen through the pierced chrome tension hoop |
| The 12 little chrome "Z" clips fastened to the pan rim support the tension hoop screws. |
Labels:
Aquila tenor ukelele strings,
Banjo ukelele,
Harmen Hielkema.,
nut,
saddle,
vellum
Saturday, May 4, 2013
Harmen's Jazz bass project.
| My Jazz bass is already well used, I love this instrument, it's the first electric bass that I've owned and played, the experts tell me it plays as well as a genuine Fender! |
| Strings are Martin Darco Electric Bass Guitar Strings, D9700L Light Gauge, Nickel wound. |
| I can have some fun with the head stock can't I? This one is customized with an old 30's Marconi radio cadet's badge depicting 3 soaring gulls in blue and white enamel on brass. |
Labels:
Harmen Hielkema,
Jazz bass,
New Zealand.,
sea foam green
Harmen's Taylor AB1 fret less bass.
| This is the result of my recent upgrade of my Taylor AB1. Frets removed and fret slots filled with wall nut veneer. |
| Luthier Steve Klien's Art Deco styling is just right to my eye. |
| I customised my head stock with the addition of a tiny enamel on brass badge depicting a palm tree, very Polynesian. |
Thursday, April 4, 2013
Clive Franks, sound man extraordinaire pays us a visit in Rawene
| Di and Clive taking a photo opportunity in from of my latest sculpture Sati the elephant. |
Clive and I shared our enthusiasm for Fender Jazz Bass and he played and admired my Taylor AB1 fretless bass. Then he spotted my classic drum kit, thanks for the photos Clive.
| photo courtesy of Clive Franks |
| photo courtesy of Clive Franks |
Subscribe to:
Posts (Atom)

